Fun Step By Step Artificial Grass Installation

For More information please visit- httpwwwdirect-artificial-grasscouk.

Step by step artificial grass installation. Now its time to clean the concrete surface where you are planning to install artificial turf. Cut the fake grass to fit the installation area you measured. This will make room for your new base and you may want to use a rototiller to break up the soil as you dig up your old lawn.

The first step that you will need to take before installing your artificial grass is to make sure that the area is prepared. The correct infill is crucial when installing artificial grass. Without it the grass flattens without any support.

However you will need to measure the lawn area step 1 in advance so you can buy the necessary amount of turf from your artificial grass supplier. We decided to lay fake turf in our backyard from scratch. Align the fake grass.

Artificial Grass Installation on Soil is fully porous and the products are UV protected. Spread the infill across the entire area. Alternatively you can roll out the artificial grass on a driveway to cut the sections properly.

Joining Tape Artificial grass Glue Underlay Foam if required and Artificial grass. Remove natural grass or other surface. In order for the artificial grass sections to stay in place you need to fasten the sections every 16-inches.

If you have any pressure washer available then it will do the job efficiently and quickly. Hopefully this step by step. The fully porous system is used for most outdoor artificial syntheti.